Introducing automated flow control to the vibrating screen feeder.
J&H has integrated the benefits of its electromechanical modulating control valve with its static body vibrating pan feeder. 1st generation screen feeders required manual deflectors located at the inlet to adjust feed flow to optimize distribution. This combination now offers the ability to control material flow locally or remotely via an electric actuated bucket valve, enhancing the feeders capability to equally disperse material across full width of screening machine, improving efficiency.
The modulating flow control valve is ideal for plants with restrictive feed chute geometry and/or inadequate vertical chute height.
Experience the J&H advantage today by contacting a representative for your next project, and to view the animation in its entirety click the following YouTube link or the image above.
J&H is pleased to announce the successful commissioning of IFFCO Train C at the Kandla…
The J&H Lump Breaker is a compact machine designed with short, hardened tool steel teeth…
The Heated RotoThrow is optimal for screening moisture-laden products. Isolated low voltage is applied to…
The J&H RotoThrow screening machine is a particle separator that generates an elliptical screening motion…
From dryer discharge to finished product, J&H Dry Frac Sand Plants provide complete dry screening…
The J&H Double Deck Vibrating Screen is a static body, vibrating wire mesh screening machine…