J&H Equipment is an engineering, design, and manufacturing company specializing in process equipment for today’s frac sand industry. With over 47 years of experience, our company takes pride in providing custom solutions to increase efficiencies, overcome deficiencies, and improve profits. We look forward to the opportunity to discuss how J&H can be instrumental in providing process solutions and results.
Experience the J&H advantage today by contacting a representative for your next project.
The J&H Material Stream Splitter is a multi-discharge valve that uses divider blades to evenly distribute the flow of loose, dry material into two, three, four, five, or six independent streams. Divider blades are driven by actuators, available in rotary electromechanical or pneumatic. J&H Stream Splitters are custom engineered to meet application, tonnage, and plant geometry requirements. Stream splitters also provide the capability to shut off flow to a single chute. This innovative feature allows the end user to conduct downstream maintenance without pausing production of the entire plant.
Robust, solid-welded stream splitter casings are available in carbon steel, 304 stainless steel, or 316 stainless steel construction. For abrasive material applications, AR400 liners are available in wear zones. Full-width access doors are provided for ease of maintenance or cleanout.
Splitters are operated using a control box that allows for local control or DCS integration. IP65 limit switches for positional confirmation are available as required.
The J&H Multiport Rotary valve is the latest line of specialty valve designed to meet the needs of the material processing industries. The Multiport Rotary Valve uses a rotary mounted internal chute to direct dry granular product material from one feed inlet chute into one of several discharges arranged around the valve. J&H has multiport rotary valves for four to six discharges. All of these valves will operate exactly the same way, with the only difference being the number and position of the discharges programmed into the actuator controller.
J&H Multiport Rotary valves are designed for ease of operation and reliability. Electronic controller monitors the position and sends out digital and analog signals that can be observed from the control room.
The robust design provides reliable service for years with minimum maintenance required. Built with a body of carbon steel, the valves are coated with a durable, industrial powder coat. Internal chutes are made of carbon or stainless steel. Feed and discharge port flanges designed to match customer chute work. All J&H diverters are built with large access doors to allow for easy access to the internal components and are designed for simplicity and ease of use.
The J&H HD Dual Rotor Chain Mill utilizes rotors equipped with hardened chain flails rotating in opposite direction. Material is fed into the mill where it is separated and directed into the optimal crushing zones of each high speed rotor. Material is impacted by the chains and redirected into the path of the opposition rotor, generating a unique crushing efficiency.
J&H HD Chain Mills are designed with a cantilever-mounted “floating rotor” which reduces vibration transmission to a negligible amount. This design feature allows the machine to be installed directly onto a concrete or steel floor without the addition of costly structural considerations or isolation pads. The chain mills feature large front access doors and side-hung access doors that provide unparalleled quick access for inspection and maintenance.
Robust, solid welded chain mill frames are equipped with impact zone rubber pads that are designed for longevity and ease of maintenance. Rotor chains can be easily inspected or replaced without disassembly of additional parts of the chain mill. Zero speed switch and access door proximity switches are available as options.
The J&H 6-Way Modulating Material Splitter is designed to divide a singular stream of input material in six equal output streams. Internal gates are maneuvered by electromechanical actuators with 0-100% of travel span modulating capability.
J&H Splitters are also designed to include flow shut-off capability of any one outlet chute for downstream equipment maintenance, product redirection, etc. and are ideal for elevator or conveyor discharge applications requiring multiple splits or distributions of materials.
The J&H Material Stream Splitters are customizable in size/geometry as well as the number of outlets required (two, three, four, five, six, or more.)
Experience the J&H advantage today by contacting a representative for your next project.
Introducing automated flow control to the vibrating screen feeder.
J&H has integrated the benefits of its electromechanical modulating control valve with its static body vibrating pan feeder. 1st generation screen feeders required manual deflectors located at the inlet to adjust feed flow to optimize distribution. This combination now offers the ability to control material flow locally or remotely via an electric actuated bucket valve, enhancing the feeders capability to equally disperse material across full width of screening machine, improving efficiency.
The modulating flow control valve is ideal for plants with restrictive feed chute geometry and/or inadequate vertical chute height.
Experience the J&H advantage today by contacting a representative for your next project, and to view the animation in its entirety click the following YouTube link or the image above.
To view the article in its entirety click the image below:
J&H Equipment Inc.140 Sunshine Way
Alpharetta, GA 30005
Phone: (770) 992-1606
Fax: (770) 992-1983
Request more detailed information »
Print Friendly
