Equipment Spotlight Archives - Page 2 of 2

Equipment Spotlight: J&H Static Body, Vibrating Side Feeder/Distributor

November 7, 2022 by Stuart Spetseris

The J&H Static Body Side‐feed (SBS) Feeder is a machine designed to increase the efficiency of a screening machine by distributing the gravity fed flow of material across the width of the screen’s wire cloth. The pan is designed to regulate the incoming flow of material by absorbing the momentum of high velocity material or fluidizing slow moving material. The vibrating distributor pan is isolated from the body of the feeder by rubber buffers, which means that the body of the feeder is static and can be rigidly connected to the screen feed inlet and to feed chutes upstream of the feeder. Because the body of the feeder is static and the vibrating components are nowhere directly connected to the plant, there is minimum transmission of the vibration.

All J&H Vibrating feeders come in sizes that correspond to the width of the screen machine such that the feeder discharge flange matches the inlet flange for the screen it is feeding. The feeder is equipped with both side and top doors for quick access and simple inspections. This Feeder allows control of the product flow and the shape and slope of the distributor pan will result in distribution of the product material onto the screen below.

Experience the J&H advantage today by contacting a representative for your next project.

Filed Under: News Tagged With: Equipment Spotlight, Feeder, Regulate Material

Equipment Spotlight: J&H Automatic Product Sampler

October 10, 2022 by Stuart Spetseris

The J&H Automatic Product Sampler is designed to enable users to test the quality of dry bulk product by taking a sample from a falling stream of material. The J&H Automatic Sampler collects sample material in a cup that rotates through the falling stream of material. The sample is then discharged into a container and the cup returns to its original, shielded position until the next sample is initiated.

The J&H Samplers are compact, efficient, and dependable boasting a proven drive system with no critical components exposed to material. All Samplers are made to order and are available in multiple sizes and materials of construction in order to fit the requirements of your plant layout, chute size and orientation, and type of product material. The Sampler features a large removeable top panel which allows for quick and easy maintenance

Sample frequency and quantity are adjustable to fit specific sampling needs and sample intervals can be set to any point between 2 and 30 minutes. Production is not interrupted during sampling process.

Experience the J&H advantage today by contacting a representative for your next project.

Filed Under: News Tagged With: Automatic Product Sampler, Equipment Spotlight, Sampler

Equipment Spotlight: J&H MOD III HD Dual Rotor Chain Mill

August 1, 2022 by Stuart Spetseris

The J&H HD Dual Rotor Chain Mill utilizes rotors equipped with hardened chain flails rotating in opposite direction. Material is fed into the mill where it is separated and directed into the optimal crushing zones of each high speed rotor. Material is impacted by the chains and redirected into the path of the opposition rotor, generating a unique crushing efficiency.

J&H HD Chain Mills are designed with a cantilever-mounted “floating rotor” which reduces vibration transmission to a negligible amount. This design feature allows the machine to be installed directly onto a concrete or steel floor without the addition of costly structural considerations or isolation pads. The chain mills feature large front access doors and side-hung access doors that provide unparalleled quick access for inspection and maintenance.

Robust, solid welded chain mill frames are equipped with impact zone rubber pads that are designed for longevity and ease of maintenance. Rotor chains can be easily inspected or replaced without disassembly of additional parts of the chain mill. Zero speed switch and safety switches are available as required.